nasaforums.com

Official Forums of the National Auto Sport Association
It is currently Wed Sep 19, 2018 11:33 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: NP01 build notes
PostPosted: Sat Jan 09, 2016 10:01 am 
Offline
Forum Hot Lapper
Forum Hot Lapper

Joined: Tue Feb 08, 2011 7:04 pm
Posts: 101
Last weekend we put together chassis number 11, a car that I own as a team with Zane Dexter. We assembled it at Zane's garage in Central City Nebraska and it was a great experience. There were 4 of us working on the project at various times and we spend under 100 hours so far, but still have some body work to install.

The kit is all assembled with basic hand tools, but there were a few things we needed so I will detail that here. We were in a machine shop, not a car garage so we did not have a few things but they were easily sourced. We did have a lift, and that was a luxury but certainly not necessary. We began with literally zero prep or knowledge other than looking at the car in various stages online. Starting late Friday around 6pm, we had a rolling ready to run chassis with no body work Sunday at 2 pm. Yes we slept, and even ate all our meals too.

The assembly order sheet with parts list is your guide, and I wish I had read it over more before we started, but some of it just makes more sense when you are in the middle of looking at the parts. The diagrams in the documents are helpful, but again, wish I had reviewed them and had them printed in a large format. We used laptops and zoomed and panned as needed.

You do need an engine hoist (we had one), the only things we had to buy were a right angle drill and a rivnut tool. We wanted a hydraulic riveter but never did get one. Hand riveted everything, no big deal. The rivnut tools are only 20-25 bucks, and the angle drill is cheap too. We should have purchased this one:
http://www.harborfreight.com/38-in-vari ... 60610.html
but had an adapter instead which did not give us as much clearance.

Everything else is basic hand tools both metric and standard, hex drivers are a big help. We should have taken a lot of pictures of the process and intended to, but once we dug in it was hard to stop. We were like children on christmas morning enthusiastically working on our new toy.

The body is so much easier to assemble than I thought it would be. I knew the mechanical stuff would be fine, but never having done any body work I was concerned about it before we started. None of the pieces had any fitment issues at all, if you can clamp, drill, and rivet, you can put this together and have it come out looking like you have done many before.

If you are considering building the car yourself I would urge you to go for it, such a fun experience and you get to know the car very well. We had a great time building it I want to do it again.
I know Elan will do it too for $8500, which is fair, but I would do it for a lot less for the pure enjoyment of it. It is the only time I have ever worked on a car without getting my hands dirty, that was nice.

I am willing to discuss at length with anyone who wants to build their own, just email me mrivard@drivenasa.com and we can get on the phone.


Top
 Profile  
 
 Post subject: Re: NP01 build notes
PostPosted: Tue Jan 19, 2016 9:09 am 
Offline
Forum Time Trialer
Forum Time Trialer

Joined: Mon Mar 19, 2007 11:09 am
Posts: 294
Location: Rosemount, MN
Share some pictures?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group